UP31B Medium-deep Hole Mining Rig
Product Description
UP31B medium-deep hole mining drill rig has a minimum tunnel size of 3.8 X3.8m, which can meet the maximum 5.5m high mining tunnel operation. It can drill 360° annular blastholes and parallel holes with a maximum spa cing of 3.0 meters. The four-wheel drive articulated chassis is suitable for various small and medium-sized tunnels. The diesel-driven walking system can quickly transfer between mining areas. The independently developed high-frequency and high-pressure fully hydraulic rock drill has excellent performance, fast drilling speed, good hole straightness, and low cost of use. It is the first choice for mining.
Product Picture
Technical Parameter
| Hole range(mm) | 64-102 |
| Drilling depth Max.(m) | 50 |
| Drilling depth (m) | 30 |
| Drill Rod size(mm) | T45 *1525 |
| Working face size WxH(m) | 8500x5150 |
| Turning radius(mm) | inner R2,650 / outer R5,000N |
| Dimension(LxWxExtension H)mm | 9200x1850x3300 |
| Weight(T) | ≤16T |
| Rock Drill(Drifter) |
| Model | ZY104MZ |
| Percussion power(Kw) | 20 |
| Percussion frequency (Hz) | 60 |
| RPM(rpm) | 0-140 |
| Max. torque(N.m) | 860 |
| Weight (Kg) | 184 |
| Air compressor |
| Model | ZGHA 56 Ⅱ |
| Air pressure (bar) | 7 |
| F.A.D (m3/min) | 1 |
| Diesel engine | |
| Model | B3.9CS4-C110(Cummins) |
| Power(Kw) | 75 |
| RPM(r/min) | 2200 |
| Electric motor |
| Power(Kw) | 55 |
| Voltage(V) | 380 |
| Cable length(m) | 80 |
| Feed |
| Total length(mm) | 3600 |
| Traveling length (mm) | 1980 |
| Extension length (mm) | 1200 |
| Tramming |
| Tramming speed (km/h) | 12 / 4.5 |
| Gradeability(°) | 15 |
| Articulated steering angle(°) | ±41 |
| Service brake | 2 independent circuits |
| Hydraulic jacks | 4 (front jacks retractable) |
| Fuel tank capacity(L) | 63 |
| Ground clearance (mm) | 300 |
| Boom |
| Parallel holding | Parallel swing |
| Parallel distance (mm) | 3000 |
| Drill boom extension (mm) | 460 |
| Boom swing angle (°) | ±45 |
| Feed tilt angle(°) | +45 / -60 |
| Feed roll-over(°) | 360(Turbine shaft) |
| Water system |
| Flow rate (L/min) | 100 |
| Pressure (bar) | 14 |
| Min. water inlet pressure(bar) | 2 |
Our Company & Servce
Glorytek Industry (Beijing) Co., Ltd. based in Beijing, China, is a leading manufacturer and exporter of high-quality drilling equipment and parts. With a highly experienced team of designers and engineers, we successfully deliver projects tailored to our clients' requirements. Our products find extensive use in mining, water well drilling, exploration, anchor grouting, side slope protection, oil and gas, underwater rock drilling, hydropower, and national defense projects.
FAQ
Q: How can we choose a suitable water well drill rig?
A: We normally recommend a suitable model according to drilling depth, drilling hole dia. and layer condition on site.
Q: Are you a factory or a trading company ?
A: We are an integrated corporation specialized in manufacturing and exporting.
Q: What is your payment terms?
A: We can accept T/T,L/C.
Q:.What is your MOQ? How long is the delivery time?
A: Our MOQ is 1 sets. Normally for drill rig, the delivery time is about 25-30 days after receiving payment, the drilling tools would be about 15 days.
Q:. How long is the warranty?
A: The guarantee period for mainframe is one year (excluding the quick wear parts).
Q: Can we print my Logo on the products?
A: Yes, we can. We support OEM .
Product Tags:
|
|
UP31B Medium Deep Hole Mining Annular Blast holes Parallel Holes Underground Drill Rig Images
|
